Sony DCR-TRV40 Operating Instructions Manual page 24

Step 4 Using the touch panel
Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger o1"the supplied stylus (DCR TRV50
only) to operate each f\mction. This section describes how to operate the touch panel
during recording o1"playing back images on a tape.
(1) Prepare the power supply (p. 15 to 19).
(2) Press OPEN to open the LCD panel.
(3) Set the POWER switch to CAMERA, VCR or MEMORY/NETWORK (DCR
TRVS0 only) while pressing the small green button.
(4) Press FN. Operation buttons appear on the LCD screen.
(5) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(6) Press a desired operation item. Refer to relevant pages of this manual fbr each
fimction.
5,6
When the POWER switch
is set to CAMERA
To return to FN
Press EXIT.
To execute settings
Press _ OK. The display rettuns to PAGE 1/PAGE2.
To cancel settings
Press _ OFF to return to PAGEI/PAGE2.
1
24