Frame Recording - Sony DCR-TRV40 Operating Instructions Manual

Frame by frame recording
- Frame recording
You can make a recording with a stop motion animated effect using Dame recording.
To create this effect, alternately move the subject a little and make a fl'ame recording.
We recommend that you use a tripod, and operate your camcorder using the Remote
Commander after step 4.
(1) In tile standby, press MENU, then turn tile SEL/PUSH
EXEC dial to select
FRAME REC in _, then press tile dial (p. 201).
(2) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(3) Press MENU to erase tile menu display.
Tile FRAME REC indicator lights up.
(4) Press START/STOP to start fl'aine recording. Your camcorder makes a
recording for about six fl'ames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
4
MENU
To cancel the frame recording
Perform either of"the following:
Set FRAME REC to OFF in the menu settings.
Set the POWER switch to other than CAMERA.
Note
The remaining tape time is not indicated correctly if you use this f\mction continuoosly.
When using the frame recording
The last recorded fi'ame is longer than other flames.
74