Sony DCR-TRV40 Operating Instructions Manual page 209

Changing the default settings with the menu
POWER
Icon/item Mode
Meaning
switch
OTHERS
DISPLAY • LCD
To show the display oll the LCD screen and in VCR
the viewfinder CAMERA
MEMORY/
NETWORK
RECLAMP
V OUT/LCD
• ON To light up the camera recording lamp at tile
front of your camcorder
OFF To tnm the camera recording lamp off" s o that
the person is not aware of the recording
VIDEOEDIT • RETURN To cancel video editing. VCR
TAPE To make a program and perform video editing
(p. 89)
MEMORY To make program and perform MPEGediting
(p. 151)
To show the display on the TV screen, LCD
screen and in the viewfinder
CAMERA
MEMORY/
NETWORK
Note
If you press DISPLAY/TOUCH PANEL with DISPLAY set to V OUT/LCD in tile menu
settings, the picttn'e fl'om a TV or VCR will not appear on the LCD screen even when
yore camcorder is connected to outputs on tile TV or VCR.
When recording a closesubject
When REC LAMP is set to ON, tile red camera recording lamp on the fl'ont of the
camcorder may reflect on the subject if it is close. In this case. we recommend that you
set REC LAMP to OFF.
In more than five minutes after removing the power supply
Tile WHT BAL. FLASH LVL. HiFi SOUND, AUDIO MIX and COMMANDER settings
are retmned to their ctefault settings.
Other menu settings are held in memo1T even when the battery is removed.
o
E:
g
.<
o
.=
o
a
209