Sony DCR-TRV40 Operating Instructions Manual page 129

Recording still images on "Memory Stick's
- Memory Photo recording
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make
sure that the LOCK switch is set to tile left (unlock) position.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET in _,
then press the dial (p. 203).
(3) Turn the SEL/PUSH EXEC dial to select BURST, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
(5) Press MENU to make tile menu setting disappear.
(6) Press PHOTO deeper.
MENU
If the capacity of the "Memory Stick" becomes full
"_'_x7 FULL" appears on the screen, and you cannot record a still image on this "Memory
Stick."
The number of still images in continuous shooting
Tile number ofstill images you can shoot eontinuot=sly varies depending on the image
size and tile capacity of the "Memo_ T Stick."
During recording still images continuously
Tile flash does not work.
When shooting with the self-timer or the Remote Commander
Your eai_lcorder automatically records tip to the HlaXilTIUHI recordahle nunlber of still
images.
o
,2
©
129