Recording - Basics - Sony DCR-TRV40 Operating Instructions Manual

-- Recording - Basics --
Recording a picture
Your camcorder automatically focuses for you.
(1) Remove
the lens cap by pressing both knobs oil its sides and pull the lens cap
string to fix it.
(2) Prepare the power supply and insert a cassette. See "Step 1" to "Step 3" for
more information (p. 15 to 23).
(3) Set tile POWER switch to CAMERA while pressing the small green button.
This sets your camcorder to the standby.
(4) Press OPEN to open tile LCD panel. Tile viewfinder autoinatically turns off.
(5) Press START/STOP. Your camcorder starts recording. The REC indicator
appears. Tile camera recording lamp located oil tile front of your camcorder
lights up. To stop recording, press START/STOP again.
LOCK
/
switch
1
5
_40min
_fi_S_REC 000:01
26