Sony DCR-TRV40 Operating Instructions Manual page 86

-- Editing --
Dubbing a tape
Using the AN connecting cable
You can dub o1"edit on the VCR connected to your eanleorder using your eamcorder as
a player.
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your canlcorder.
Before operation
• Set DISPLAY in _ to LCD in the menu settings. (The default setting is LCD.)
• Press the tbllowing buttons to make the indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DISPLAY/TOUCH PANEL, DATA CODE
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
(1) Insert
a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Prepare the VCR for recording, then set the input selector to LINE.
Connect the A/V connecting cable to AUDIO/VIDEO jack.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. Refer to the operating instructions of your VCR.
White
S VIDEO
IN
_, S VIDEO
@ VIDEO
c::d2:x : Signal flow
A/V connecting
cable (supplied)
Red
When you have finished dubbing a tape
Press • on both your eamcorder and the VCR.
VCR
86