Sony DCR-TRV40 Operating Instructions Manual page 142

Superimposing a still image in the "Memory Stick" on an image
- MEMORY MIX
Before operation
Insert a "Memory Stick" recorded still images into your camcorder.
(1) Set tile POWER switch to MEMORY/NETWORK (DCR TRV50 only). Make
sure that the LOCK switch is set to tile left (unlock) position.
(2) Press FN and select PAGE2.
(3) Press MEM MIX. The last recorded or last composed image appears on tile
lower part of tile screen as a thumbnail image.
(4) Press /+ on the right lower corner of the screen to select tile still image which
you want to superimpose.
: To see the previous inlage
+: To see the next image
(S) Press a desired mode. The still image is superimposed oil the moving picture.
(6) Press /+ on the left lower corner of the screen to adjust the effect, thenpress
OK to return to PAGE2.
M. CHROM:
M. LUMI:
C. CHROM:
Blue chroma key (only blue background portion) to extract a
still ilnage and superimpose it on a nlovitlg image
Brightness level used when extracting a still image and
superinlposing it oil a moving image
Blue chroma key (only blue background portion) to extract a
moving picture and superimpose it on a still image
The fewer bars there are on tile screen, tile stronger tile effect.
(7)
(8)
Press EXIT to return to FN.
Press PHOTO deeper to start recording.
The image displayed oil the screen will be recorded oil a "Menlory Stick."
Recording is complete when the bar scroll indicator disappears.
142