Step 4 Using The Touch Panel - Sony DCR-TRV40 Operating Instructions Manual

Step 4 Using the touch panel
Notes
• When
using the touch panel, press operation buttons with your thumb supporting the
LCD panel fl'om the back side of it or press those buttons lightly with your index
finger.
• Do not
press tile LCD screen with sharp pointed objects other than tile stylus o
o
supplied. (DCR TRV50 only)
• Do not press the LCD screen too hard. _'
• Do not tonch the LCD screen with wet hands. _
• If FN is not on the LCD screen, toncb tbe LCD screen lightly to make it appear. Yon
can control the display with DISPLAY/TOUCH PANEL on your camcorder. _-
• When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 230).
• When the LCD screen gets dirty, use the supplied cleaning clotb.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
Press FN to display the following buttons:
When the POWER switch is set to CAMERA
PAGE1 END SCH, SPOT FOCUS, DIG EFFT, MEM MIX, SPOT METER
PAGE2 LCD BRT, SELFTIMER
When the POWER switch is set to VCR
PAGE1 LCD BRT, _ PB, INDEX, END SCH
PAGE2 DIG EFFT, PB ZOOM, _ PB, INDEX, DATA CODE
See page 120 when the POWER switch is set to MEMORY/NETWORK (DCR TRV50
only).
25