On Your Computer; For Windows Users; Viewing Images Recorded On A - Sony DCR-TRV40 Operating Instructions Manual

Connecting your camcorder to your computer using the USB cable
- For Windows users
(11)Follow the on screen messages so that the Add Hardware Wizard recognizes
that the USB drivers have been installed. The Add Hardware Wizard starts
three times because three different USB drivers are installed. Be sure to allow
the installation to complete without interrupting it.
For Windows 2000 Professional Windows XP Home Edition/Profbssional users
(1 ?)After the "File Needed" screen appears.
Open "Browse..." _ "My Computer" _ "hnageMixer" _ "Sonyhcb.sys',
and click "OK".
Viewing images recorded on "Memory Stick"s
Before operation
Set USBCONNECT in _ to NORMAL in the menu settings. (The default setting is
NORMAL.)
(1) Insert a "Meinory
Stick" into your camcorder.
(2) Connect the AC power adaptor and set the POWER switch to MEMORY/
NETWORK (DCR TRVS0 only).
(3) Connect the _ (USB) jack on your caincorder with the USB coimector on your
computer using the supplied USB cable.
USB MODE appears on the LCD screen of your camcorder. Your computer
recognizes the camcorder, and the Add Hardware Wizard starts.
(USB)jack
Push into the end
USB connector
iiiiiifliliflilifliliflilifliliflilifliliflili
<
g
c
_%
g
o
o
"o
USB cable (supplied)
(4) Follow the on-screen messages so that the Add Hardware Wizard recognizes
that the USB drivers have been installed. The Add Hardware Wizard starts
two times because two differer_t USB drivers are installed. Be sure to allow the
installation to coinplete without interrupting it.
You cannot install the USB driver if a "Memory Stick" is not in your camcorder.
Be sure to insert a "Memory Stick" into your camcorder before installing the USB
driver.
181