To Display The Format Of The Online Operation - Hitachi XP P9500 User Manual

To display HDevName and OSPathID, execute the view operation as
follows:
# /usr/DynamicLinkManager/bin/dlnkmgr view -lu
For details on how to execute the view operation and display the host
device name and OS management path ID, see
on page 6-49
be specified for the -hdev parameter. This parameter is not case
sensitive.
Example
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example

To Display the Format of the Online Operation

-help
Displays the format of the online operation.
Example
in Parameters on page
The following shows an example of placing online path for which the
host device name is hdisk0 and OS management path ID is 00001
while confirming command operation.
# /usr/DynamicLinkManager/bin/dlnkmgr online -path –hdev
hdisk0 –ospathid 1
KAPL01050-I The currently selected paths will be changed to
the Online status. Is this OK? [y/n]:y
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
The following example shows how to place a path, whose
AutoPATH_ID is 000002, online without asking for confirmation of
command execution from the user:
# /usr/DynamicLinkManager/bin/dlnkmgr online -pathid 2 -s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
The following example shows how to display the format of the online
operation:
# /usr/DynamicLinkManager/bin/dlnkmgr online -help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path]
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
To Display LU Information
6-32. Only one set of values can
6-15