Ardiag Operational Commands - HP Surestore Disk Array 12h - And FC60 System Administrator Manual

ARDIAG Operational Commands

Table 23 lists the ARDIAG operational commands and their descriptions.
Command
CLRLOG
CREATELUN
DELETELUN
DESCRIBE
DOWNLOAD
FORMAT
INQUIRY
READLOG
RECOVER
REQSENSE
RESTART
REVISION
ROMT
SETOPTIONS
SHUTDOWN
WRTMT
Table 23. ARDIAG Operational Commands
Allows the user to clear the specified target's internal logs.
Allows the user to create a LUN via the specified controller path
to the disk array.
Allows the user to delete a LUN via the specified controller path
to the disk array.
Displays LUN configurations and warning states.
Allows the user to download firmware to the specified controller
or internal disk.
Allows the user to format the specified target.
Issues an Inquiry to an array controller or an internal disk.
Allows the user to read the specified target's internal logs.
Allows the user to restore controller map information in the
specified SureStore E (AutoRAID) Disk Array.
Issues a Request Sense on the specified target.
Allows the user to bring the array out of the Shutdown state via
the specified controller path.
Displays controller, drives and software revisions.
Read/Verify test to the specified internal mechanism..
Allows the user to view and set specific options for the array
controller.
Allows the user to put the array into a Shutdown state via the
specified controller path .
Destructive write/read and verify test to the specified internal
mechanism.
Using the ARDIAG Offline Diagnostic on MPE
ARDIAG Operational Commands
Description
167