Chapter 6. Using The Arm Command Line Utilities For Mpe; Setting U Pmpe Posix Shell - HP Surestore Disk Array 12h - And FC60 System Administrator Manual

Chapter 6. Using the ARM Command Line
Utilities for MPE
The AutoRAID software includes a set of AutoRAID Manager (ARM) command line utilities. These
commands provide the ability to manage the disk array from the MPE command prompt.
The ARM commands can be used to perform a number of tasks. These tasks are intended for advanced
users and involve procedures such as diagnostics, performance monitoring, setting SCSI values, and disk
array maintenance.
LUNs and Logical Drives. To maintain consistency with MPE terminology, the term LUN is used
to refer to a disk array logical drive. The two terms are used interchangeably and refer to the
same logical entity on the disk array.
Setting Up MPE POSIX Shell
To set up the MPE POSIX shell to execute the ARM command line utilities, refer to the following example:
1. :SETCATALOG HPPXUDC;APPEND;SYSTEM
2. :SH
3. >cd /opt/hparray/bin
125