HP Surestore Disk Array 12h - And FC60 System Administrator Manual page 221

Managing the HP SureStore E Disk Array 12H on Windows NT
Solving Common Installation Problems
not installed on the server when running Setup, the AutoRAID SNMP agent is not installed. To load the
AutoRAID SNMP agent, install the NT SNMP service and reinstall the AutoRAID Manager software.
Security Violation error when attempting to access the disk array using AutoRAID
Manager from remote client.
This is typically a caused by the AutoRAID Manager Administrator folder (default
Program Files\AutoRAID\ARMadmin) not being shared on the server for access. For more information
on security, see "Controlling Access to the Disk Arrays".
Server hangs during boot process after installing the HP SureStore E Disk Array 12H.
This may occur if there is no logical drive created on the disk array. At least one logical drive must be
created on the disk array before the host server can access the array. During the boot process, the server
must recognize a logical drive on the disk array to ensure the HBA device driver is loaded properly. If
there is no logical drive on the disk array, the server may hang during the boot process. A logical drive
can be created using the disk array control panel as described in the HP SureStore E Disk Array 12H
User's and Service Manual.
221