Using the ARDIAG Offline Diagnostic on MPE
Operational Command Descriptions
************************************************************
* About to update Unknown Product currently at
* firmware revision 0256 with new firmware revision 0284.
************************************************************
Notes for this firmware release (from SEA5400):
1G and 2G 5400 RPM Seagate
Do you want to do the update (y/[n])? y
Please be patient.
minutes.
WARNING!
IF YOU INTERRUPT THIS PROCESS, THE DEVICE COULD BE RENDERED INOPERATIVE!!
Shutting down the array...
Downloading the firmware image...
If this is the last firmware download you want to perform on this array,
you can reset the array, which causes firmware changes on the disks to
take effect.
waiting to do the reset after the last one.
array controller causes an automatic reset.
Do you want to perform a reset ([y]/n)? y
Please wait while the array performs a reset...
************************************************************
*
************************************************************
ARDIAG>
176
The firmware download process may take several
If you have more downloads to do, you will save time by
Firmware downloaded SUCCESSFULLY!
Note that a download to the