Chapter 9. Using Autoraid Manager For Windows Nt; Online Help; Selecting A Disk Array - HP Surestore Disk Array 12h - And FC60 System Administrator Manual

Chapter 9. Using AutoRAID Manager for
Windows NT
AutoRAID Manager for Windows can be used to perform all the tasks involved in normal management of
your HP SureStore E Disk Array 12H. AutoRAID Manager can be used for:
Configuring a New Disk Array
Checking Disk Array Status
Changing Disk Array Configuration Settings
Managing Logical Drives
Adding a Disk
Rebuilding the Disk Array
Analyzing Disk Array Performance
Performing Disk Array Maintenance Tasks
This chapter describes the steps involved in performing each of these tasks.

Online Help

AutoRAID Manager includes detailed online Help. If you need assistance in performing any task, the Help
should provide the guidance you need.

Selecting a Disk Array

Before you can manage a disk array using AutoRAID Manager, you must select the array from the Detail
pane. See "Setting Up AutoRAID
to the Array List window.
To select a disk array:
1. In the Detail pane, click the disk array you want to manage. If it is not visible in the Detail pane, you may
need to select another view.
2. Right click the array and use the property pages (tabs) for the operation(s) you want to perform.
Manager" in the preceding chapter for information on adding disk arrays
223