Deletelun - HP Surestore Disk Array 12h - And FC60 System Administrator Manual

Using the ARDIAG Offline Diagnostic on HP-UX
Operational Command Descriptions

DELETELUN

The DELETELUN command allows the user to delete a LUN from the specified disk array.
Synopsis
DELETELUN
Output
ARDIAG> DELETELUN
Enter the number of the LUN to delete: [default = 0]
************************************************************
*
************************************************************
Continuing with DELETELUN WILL DEFINITELY RESULT IN DATA LOSS.
All information stored on the LUN to be deleted will be lost
and the physical storage previously used will be freed...
************************************************************
Lun 2 selected
Delete selected lun [default = [n]?]y
Lun 2 was successfully deleted.
Additional notes:
Any problems detected by the DELETLUN command will be displayed with an appropriate error
message and a prefix of ERROR, INVALID or FAILED.
78
DATA LOSS WARNING! *