HP Surestore Disk Array 12h - And FC60 System Administrator Manual page 112

Using the ARDIAG Offline Diagnostic on HP-UX
ODE interface
SHOWSTATE - Display the values of the following environment variables:
LOOP - Run a test this many times.
ERRPRINT [ON | OFF] - Print low level error messages.
ERRNUM [ON | OFF] - Print one-line, numbered errors.
ERRPAUSE [ON | OFF] - Pause module on error.
ERRONLY [ON | OFF] - Print only error messages.
INFOPRINT [ON | OFF] - Print informational messages.
ISOPRINT [ON | OFF] - Print fault isolation messages.
ISOPAUSE [ON | OFF] - Pause module when isolation message is generated.
LOGSIZE - Set the size of the message log.
DEFAULT - Reset environment variables to default state.
ODE> ls
Modules on this boot media are:
filename type
-------------------------------------------------------------------
ARDIAG XXXX
112
size created description
XXX XXXX XXXXXX