HP Surestore Disk Array 12h - And FC60 System Administrator Manual page 130

Using the ARM Command Line Utilities for MPE
Configuring a New Disk Array
5. Create each LUN on the disk array by typing:
arraycfg -L LUN -a capacity <array-id>
Example:
arraycfg -L 0 -a 1000 00786B5C0000
This command creates LUN 0 with a capacity of 1000 Mbytes on the array identified by serial number
00786B5C0000.
This step makes disk array capacity available to your operating system, and it must be repeated for each
LUN to be created. Make sure you observe any operating system limitations on LUN size or number. For
more information, see "Creating a
130
LUN" in this chapter.