HP Surestore Disk Array 12h - And FC60 System Administrator Manual page 101

Additional notes:
Any problems detected by the SETOPTIONS command will be displayed with an appropriate error
message and a prefix of ERROR, INVALID or FAILED.
Table 13 contains a list of the subsystem states displayed by the SETOPTIONS command and the
naming convention used in AutoRAID documents. Several of the subsystem state names displayed by
the SETOPTIONS command have been abbreviated.
SCSI Specification
Ready
Warning
Not Enough Drives
No Quorum
No Map
Shutting Down
Shut Down
Starting Up
No Code
RESERVED
Shutdown Warning
RESERVED
Mismatched Code
Controller Mismatch
Using the ARDIAG Offline Diagnostic on HP-UX
Table 13. Subsystem States
Front Panel Display
Ready
Warning
Not Enough Disks
No Quorum
No Address Table
Shutdown Started
Shutdown Complete
Initializing
No Code
N/A
Shutdown Warning
N/A
Firmware Needed
Cntrl Mismatch
Operational Command Descriptions
ARDIAG Set Options Display
Ready
Warning
NtEnDsk
NoQuorm
Nomap
Shtgdwn
Shutdwn
Strtgup
Nocode
Resrved
Shtwrn
Resrved
FWneed
CTLmis
101