Switching Primary Controllers - HP Surestore Disk Array 12h - And FC60 System Administrator Manual

Using the HP-UX System Administration Manager

Switching Primary Controllers

Switching Primary Controllers
In dual-controller disk array configurations, the array automatically switches to the secondary controller if
the primary controller fails. However, you can switch controllers manually if necessary. This will cause the
secondary controller to assume the role of primary controller.
To switch primary controllers:
1. Select the desired disk array controller from the list.
2. Select "Actions" on the menu bar.
3. Select "Disk Array Maintenance."
4. Select "Modify Array Configuration . . ."
5. Select desired primary controller.
6. Select "OK" to effect the change.
32