Using AutoRAID Manager for Windows NT
Performing Disk Array Maintenance Tasks
To switch array controllers:
1.
Right-click the disk array from the Detail pane.
2.
Click Properties.
3. Click the Diagnostics tab.
4. Click Switch to Y (or X, as appropriate) to switch to the secondary controller.
Displaying Hardware Logs
Each controller and each disk drive in the disk array maintains its own internal hardware status log. These
logs contain information that may be useful in identifying or diagnosing problems with the array.
AutoRAID Manager regularly copies the contents of the controller logs to the log file on the host server.
You can read the contents of the hardware logs directly, and also clear the logs.
To restart the hardware logs:
1.
Right-click the disk array from the Detail pane.
2.
Click Properties.
3.
Click the Diagnostics button on the toolbar.
4.
Under Logs, click Restart.
238