Selecting A Disk Array To Manage - HP Surestore Disk Array 12h - And FC60 System Administrator Manual
System administrator's guide for hp-ux, mpe, and windows nt
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- Advanced user's manual (466 pages) ,
- User manual (310 pages)
Table of Contents
Advertisement
Using the ARM Command Line Utilities for MPE
Selecting a Disk Array to Manage
Selecting a Disk Array to Manage
When using the ARM utilities, the <array-id> field is used to identify the disk array. The <array-
id> field can contain the disk array serial number or an alias text string assigned to the array using the
arraymgr command.
For example, assume a disk array has a serial number of 00786B5C0000 is defined for this array, and it has
an alias of autoraid4. To check the available unallocated capacity on this particular disk array, you could
use any of the following commands:
arraydsp 00786B5C0000
or
arraydsp autoraid4
The serial number of all arrays in the system can be obtained using the command
arraydsp -i
For more information see
"Displaying Disk Array Serial
128
Numbers" in this chapter.
Advertisement
Table of Contents
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?