Port Menu; Ctp Card Menu - HP Surestore 64 - Director Switch User Manual

Monitoring and Managing the Director

Port Menu

Double-click a port on the Port Card View to display the a menu of options for a
port. Refer to
menu.

CTP Card Menu

Right-click the CTP card in the Hardware View to display a menu with the
following options:
82
Block All Ports—Choose this option to display the Block All Ports dialog
box. Click Yes to block all ports on the selected card or click No to cancel.
Unblock All Ports—Choose this option to display the Unblock All Ports
dialog box. Click Yes to unblock all ports on the selected card or No to cancel.
Diagnostics—Choose this option to display the Port Diagnostics dialog box.
Use this dialog box to run internal loopback and external loopback tests on
any port or all ports on the port card.
"Port Menu" on page 89 for details on displaying and using the port
FRU Properties—Choose this option to display a FRU Properties dialog
box for the CTP card.
The FRU Properties dialog box includes the FRU name, position (slot
number in the backplane), state (active, backup, or failed), part number, serial
number, and speed capability.
Beaconing—Choose this option to add a check mark to the check box and
enable beaconing for the CTP card. This causes the amber LED on the card to
flash to help you locate it in the unit.
Switchover—Choose this option to display the Switchover CTP dialog box,
as shown in Figure 21. Click Switchover to switch operation from the active
card to the backup card. When switchover occurs, the green LED illuminates
on the backup CTP card to indicate that it is now the active card.
Note: You must have maintenance authorization rights to access this feature.
Figure 15 is an example for the power supply module.
Director Product Manager User Guide