Port Card Menu; Port Menu; Port Properties - HP Surestore 64 - Director Switch User Manual

Note:
settings.

Port Card Menu

While in the Port Card View, right-click the card away from a port connector to
display a menu of port card functions.

Port Menu

While in the Port Card View, right-click any port to display the following menu
options:

Port Properties

Click this to display the Port Properties dialog box. This dialog box displays
information about the port. See
more information.
Director Product Manager User Guide
inactive if the card is an FPM card and the port data speed was set to 2
Gb/sec. To activate the port in this case, set director data speed to 1
Gb/sec, or replace the FPM card with a UPM card.
Your director model and firmware may not allow variable data speed
Threshold Alert—If a threshold alert exists for the port, an alert indicator
(yellow triangle) displays by the Threshold Alert field, and the configured
name for the last alert received displays in the field.
Block All Ports—Choose this option to display the Block All Ports dialog
box. Click Yes to block all ports on the selected card or No to cancel.
Unblock All Ports—Choose this option to display the Unblock All Ports
dialog box. Click Yes to unblock all ports on the selected card or click No to
cancel.
Diagnostics—Choose this option to display the Port Diagnostics dialog box.
Use this dialog box to run internal loopback and external loopback tests on
any port or all ports on the port card. Refer to the HP StorageWorks Director
2/64 Service Manual for instructions on using these diagnostics.
Monitoring and Managing the Director
"Displaying Port Information" on page 85 for
89