HP Surestore 64 - Director Switch User Manual page 214

Information and Error Messages
Table 9: Product Manager Messages (Continued)
Could not find
firmware file.
Could not remove
dump files from server.
Could not stop port
diagnostics.
Could not write
firmware to flash.
CUP name and port
name are identical
Date entered is invalid.
214
Message
Firmware file selected
was not found in the
FTP directory. Or, the
selected file is not a
firmware file.
Dump files could not
be deleted from the
HAFM server because
the link may be down,
or the HAFM server or
Product Manager
application is busy.
Port diagnostics could
not be stopped by the
Product Manager
application because
the Ethernet link is
down or busy, or
because the director is
busy.
A firmware version
could not be written
from the HAFM server
to FLASH memory on
the director's CTP card.
Within the address
configuration, one or
more of the port names
are the same as the
CUP name.
The date is entered
incorrectly at the
Configure Date and
Time dialog box.
Individual field entries
may be correct, but the
overall date is invalid
(for example, a day
entry of 31 for a
30-day month).
Description
Ensure file name and directory
are correct. Or, obtain a valid
firmware file from your service
representative.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation again. If the
condition persists, contact the
next level of support.
Make sure all names are
unique for the ports and CUP
name.
Verify each entry is valid and
consistent.
Director Product Manager User Guide
Action