Open Systems Management Server; Installation; Configuring The Open Systems Management Server; Configure Open Systems Management Server Dialog Box - HP Surestore 64 - Director Switch User Manual

7. If necessary, select a code page from the Code Page drop-down list.
8. Click Activate to activate changes and close the dialog box.
9. If you are finished configuring the switch, back up the configuration data.

Open Systems Management Server

The Open System Management Server (OSMS) is a keyed feature that allows host
control and inband management of the director or switch through a management
application that resides on an open-systems interconnection (OSI) device. This
device is attached to a director or switch port. The device communicates with the
switch or director through Fibre Channel common transport (FC-CT) protocol.

Installation

To install and enable this option, choose the Configure Feature Key option
under the Product Manager's Configure menu.

Configuring the Open Systems Management Server

Use these procedures to configure the open systems inband management program
to function with the switch.
The optional Open Systems Management Server feature must be installed in order
to perform this procedure.
To configure open systems management server, use the following steps:
1. Choose Configure > Management Server from the Product Manager
Figure 62: Configure Open Systems Management Server dialog box
2. Enable the management server when you click the Enable Management
Director Product Manager User Guide
window. The Configure Open Systems Management Server dialog box
displays, as shown in
Server check box. (To disable the management server, click the check box
again to remove the check mark.)
Figure 62.
Optional Features
189