Enabling Embedded Web Server; Enabling Telnet - HP Surestore 64 - Director Switch User Manual

Configuring the Director
2. Choose the folder where you want to save the file.
3. Type in a file name and extension in the File name field.
4. Click Save. The file saves to the specified folder as an ASCII text file.

Enabling Embedded Web Server

Use the following steps to enable EWS:
1. At the Hardware View page, choose Configure > Enable Web Server.
2. Choose Enable Web Server again to remove the check mark and disable the
For complete procedures on using EWS, refer to HP StorageWorks Embedded
Web Server User Guide.

Enabling Telnet

Use the following steps to enable Telnet:
1. At the Hardware View, choose Configure > Enable Telnet. Choosing
2. Choose Enable Telnet again to remove the check mark and disable telnet
156
Choosing Enable Web Server automatically places a check mark in the
check box.
EWS interface. When disabled, remote users cannot access the interface.
Enable Telnet automatically places a check mark in the check box.
access. When disabled, remote users cannot access the director through telnet.
Director Product Manager User Guide