Switch Binding Membership List Dialog Box - HP Surestore 64 - Director Switch User Manual

Optional Features
Figure 64: Switch Binding Membership List dialog box
2. If nicknames are configured for WWNs through HAFM and you want these to
3. Click Nickname, then click OK.
4. To prohibit connection to a switch port from a WWN currently in the
194
Refer to "Configuring Switch
information on how the Switch Membership List is populated with WWNs
according to options set in the Switch Binding State Change dialog box.
display instead of WWNs in this dialog box, click Display Options. The
Display Options dialog box displays.
Membership List, click the WWN or nickname in the Membership List, then
click Remove. The WWN or nickname will move to the Node List panel.
WWNs can only be removed from the fabric if any of the following is true:
The switch is offline.
Switch Binding is disabled.
The switch or device with the WWN is not connected to the switch.
Binding—Overview" on page 191 for
Director Product Manager User Guide