Table 4 I/O module LEDs (continued)
Callout
LED
Controller Node and Internal Component LEDs
Controller node LEDs are shown in
NOTE:
Issue the locatenode command to flash the hotplug LED blue.
Table 5 Controller Node LEDs
Ethernet LEDs
The controller node has two built-in Ethernet ports and each includes two LEDs (see
22)).
Table 6 Ethernet LEDs
FC Port LEDs
The controller node has two FC ports and each includes two LEDs. The arrow heads shaped LEDs
point to the port they are associated with. The illustration shows the LEDs associated with the FC- 1
port.:
22
Understanding LED Indicator Status
Table 5 (page
Status
Hotplug
Fault
Left
Link Up
Green
Speed
Amber
Right
Activity
Green
Appearance
Indicates
Off – Not ready and no power
Flashing -- activity
22).
Green
On
Quick Flashing
Slow Flashing
Blue
On
Off
Flashing
Amber
On
Off
Flashing
On
1 Gbe Link
On
100 Mbit Link
Off
No link established or 10 Mbit Link
On
No link activity
Off
No link established
Flashing
Link activity
No Cluster
Boot
Cluster member
OK to remove
Not OK to remove
Locate command issued
Fault
No faut
Node in cluster and there is a
fault
Table 6 (page