Configure Date And Time Periodic Synchronization Dialog Box; Configure Date And Time (Manually) - HP Surestore 64 - Director Switch User Manual

Monitoring and Managing the Director
Figure 18: Configure Date and Time Periodic Synchronization dialog box
2. Perform one of the following steps:
Note:
Activate, the time will synchronize at the next update period.
Figure 19: Configure date and time (manually)
Note:
seconds.
80
To immediately synchronize the director date and time with the HAFM server,
be sure the Periodic Date/Time Synchronization option is enabled and then
click Sync Now.
If you enable the Periodic Date/Time Synchronization feature and click
To set the director with a specific date and time, make sure that the Periodic
Date/Time Synchronization field is not selected. Refer to
the date and time, and then click Activate.
Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and
Figure
Director Product Manager User Guide
19. Enter