Backup And Restore Configuration; Backup And Restore Configuration Dialog Box - HP Surestore 64 - Director Switch User Manual

Using Maintenance Features

Backup and Restore Configuration

Choose this option to save the product configuration stored on the director to the
HAFM server hard disk, or to restore the product configuration from the HAFM
server. Only a single copy of the configuration is kept on the server.
The purpose of the backup is primarily for single-CTP systems, such as the
director, where a backup is needed in order to restore a replacement CTP card.
You can also use this feature for a special purpose configuration or for temporary
testing of a configuration. You cannot modify the location and file name of the
saved configuration.
Note:
1. Choose Backup and Restore Configuration from the Maintenance menu
Figure 60: Backup and Restore Configuration dialog box
2. Click Backup to save the current director configuration to the HAFM server.
180
You can only restore the configuration to a director with the same IP address.
on the menu bar. The Backup and Restore Configuration dialog box
displays, as shown in
The Backup and Restore Configuration dialog box consists of a short
description of the features performed when you choose Backup or Restore.
The following is a list of configurations that are backed up to the HAFM
server:
— Identification data (director name, description, and location).
— Port configuration data (port names, blocked states, and extended distance
settings).
— Operating parameters (BB_Credit, E_D_TOV, R_A_TOV, director
priority, preferred domain ID, rerouting delay, domain RSCNs, and
director speed (Director 2/64 only)).
— SNMP configuration (trap recipients, community names, and write
authorizations).
Figure 60.
Director Product Manager User Guide