Managing The Storageworks Director 2/64 And Director 2/140 - HP Surestore 64 - Director Switch User Manual

Product Manager Overview
Managing the StorageWorks Director 2/64 and
Director 2/140
Three options are available for managing the director through a user interface:
Note:
"operator." The default user name for the right to modify configuration data,
perform maintenance tasks, or perform other options is "administrator." The default
password for both user names is "password."
22
The Product Manager application installed on a StorageWorks High
Availability Fabric Manager (HAFM) server. Access to the Product Manager
must be through the HAFM. The HAFM and Product Manager applications
are installed on the HAFM server. The Product Manager application installs
automatically with the HAFM on remote workstations using any standard web
browser. For instructions, refer to the appropriate appendix that pertains to the
operating system for your workstation in the HP StorageWorks HA-Fabric
Manager User Guide.
The Embedded Web Server (EWS) interface. Using a browser-capable PC
with an internet connection to the director, you can monitor and manage the
director through the web server interface. The interface provides a GUI
similar to the Product Manager application, and supports director
configuration, statistics monitoring, and basic operation. (The online help
provides information regarding zoning, zone sets, and SAN management.)
To launch the web server interface, enter the director's IP address as the
internet uniform resource locator (URL) into any standard browser. Enter a
user name and password at the HAFM Login dialog box. The browser then
becomes a management console. Refer to the web server interface online help
for details on use. Refer to the HP StorageWorks Embedded Web Server User
Guide for more details on the Embedded Web Server.
The default user name for the right to view status and other information is
The command line interface (CLI). The CLI allows you to access many
HAFM and Product Manager functions while entering commands during a
telnet session with the director. The primary purpose of the CLI is to automate
management of a large number of directors using scripts. The CLI is not an
interactive interface; no checking is done for pre-existing conditions and no
prompts display to guide users through tasks. Refer to the HP StorageWorks
CLI Reference Guide for Directors and Edge Switches.
Director Product Manager User Guide