Configuring Director Date And Time; Setting Date And Time Manually; Configure Date And Time Dialog Box - HP Surestore 64 - Director Switch User Manual

Configuring the Director

Configuring Director Date and Time

The Director 2/140 Product Manager log entries are stamped with the date and
time received from the director. Use these steps to set the effective date and time
for the director.
Note:
1. At the Hardware View page, click the Configure menu.
2. Choose Date/Time from the drop-down menu. The Configure Date and
3. Set director date and time manually, or set for periodic updates. For specific
Figure 44: Configure Date and Time dialog box

Setting Date and Time Manually

Use these steps to set the director date and time manually.
1. At the Configure Date and Time dialog box, click the Periodic Date/Time
2. Click the Date fields that require change, and type numbers in the following
146
The director and HAFM synchronize at least once daily.
Time dialog box displays, as shown in
instructions, see the following sections:
"Setting Date and Time
"Synchronizing Date and
Synchronization check box to deselect the option (no check mark in the box).
The grayed-out Date and Time fields activate.
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YYYY): greater than 1980
Figure 44.
Manually" on page 146
Time" on page 147
Director Product Manager User Guide