HP Surestore 64 - Director Switch User Manual page 208

Information and Error Messages
Table 9: Product Manager Messages (Continued)
Cannot enable Open
Trunking while
Enterprise Fabric
Mode is active and the
switch is offline.
Cannot have E-Ports if
Management Style is
FICON unless
SANtegrity feature is
installed. Please
contact your sales
representative.
Cannot have spaces in
field.
Cannot install firmware
to a director with a
failed CTP card.
208
Message
Enterprise Fabric mode
is active and the switch
or director is online
and user is attempting
to enable Open
Trunking. This message
only displays if the
optional Open
Trunking feature is
installed.
Firmware is below the
required level and user
attempted to change
management style
from Open Systems to
FICON management
style with E_Ports
configured, but
SANtegrity Binding is
not installed.
Spaces are not
allowed as part of the
entry for this field.
A firmware version
cannot be installed on
a director with a failed
control processor (CTP)
card.
Description
Perform either of the following
steps:
Informational message. If
firmware is below the required
level and you install SANtegrity
Binding before changing to
FICON management style, then
E_Ports will remain as E_Ports
when you change to FICON
management style. If
SANtegrity Binding is not
installed, setting a director to
FICON management style will
change all E_ports to G_Ports.
Delete spaces from the field
entry.
Replace the failed CTP card
and retry the firmware
installation.
Director Product Manager User Guide
Action
Disable Enterprise Fabric
Mode option by selecting the
appropriate fabric in the
Fabric Tree portion of the
HAFM Manager window
(Fabrics tab) and then
selecting Enterprise Fabric
Mode from the Fabrics
menu. When the Enterprise
Fabric Mode dialog box
displays, click Start and
follow prompts to disable the
feature.
Set the switch or director
offline through the Set
Online State dialog box.
Display this dialog box by
selecting Set Online State
from th e Product Manager
Maintenance menu.