Configure Feature Key Dialog Box; New Feature Key Dialog Box - HP Surestore 64 - Director Switch User Manual

Configuring the Director
To configure a feature key, use the following steps:
1. Choose Configure > Features from the Product Manager window. The
Figure 42: Configure Feature Key dialog box
2. Click New to add a new feature key. The New Feature Key dialog box
Figure 43: New Feature Key dialog box
3. Enter the director's feature key in the Key field and click OK.
4. Click Activate to activate the new feature key.
144
Configure Feature Key dialog box displays, as shown in
displays, as shown in
Feature keys are only valid for a director with a specific serial number.
They cannot be interchanged between directors. If an error stating
"Invalid serial number" displays, verify that you have entered the feature
key that was assigned to the director. To verify, check the serial number
of the director through the Switch Properties dialog box and compare it
to the serial number listed in the documentation provided with your
feature key.
The feature key is a string of alphanumeric characters with dashes. The
key is case-sensitive, so enter the key exactly as printed in the
documentation that you received for the feature. If an error stating
"Invalid feature key" displays, verify that you have entered the feature
key correctly.
The Enable Feature Key dialog box displays with a warning, stating that this
action will override the current set of features on the director. The list in the
left column of the dialog box is a list of features that are active on the director.
The list on the right is a set of features that come with the new feature key. All
of the features that are active are included in the new feature list.
Figure 43.
Figure 42.
Director Product Manager User Guide