Audit Log - HP Surestore 64 - Director Switch User Manual

Using Logs

Audit Log

The Audit Log displays a history of all configuration changes applied to the
director from any source such as HAFM, SNMP management stations, or host.
Figure 53: Audit Log
162
Some actions, such as backing up configuration data and enabling automatic
date/time synchronization, are performed only by the HAFM server without
director interaction. These actions are indicated when HAFM displays in the
Source column, as shown in
stamp is from the director.
Date/Time—The date and time of the change on the director.
Action—User action that caused the configuration change, such as offline
status, port name change, or change of address.
Source—Identifies the user making the change through the Director Product
Manager and IP or DNS host name address of the remote user's workstation.
— Maintenance Port—Change was made by a user connected to the
maintenance port.
— HAFM application—Change was made by a Product Manager user.
— SNMP—Change was made by a remote SNMP management station.
— Fabric—Change was initiated by another director in the fabric that is not
managed by this HAFM server.
— Web server—Change was made by a user through the Embedded Web
Server interface.
— Fibre Channel Host—Change was made inband by a Fibre Channel host
through the open systems or FICON management server.
Figure 53. If HAFM does not display, the time
Director Product Manager User Guide