HP Surestore 64 - Director Switch User Manual page 221

Table 9: Product Manager Messages (Continued)
Invalid serial number
for this feature key.
Invalid UDP port
number.
Invalid value for
BB_Credit.
Invalid value for Low
BB Credit threshold
(1-99) %.
Invalid value for day
(1-31).
Invalid value for
E_D_TOV.
Director Product Manager User Guide
Message
The serial number and
the feature key did not
match.
The specified user
datagram protocol
(UDP) port number is
invalid. The number
must be an integer
from 1 through 65535
inclusive.
At the Configure Fabric
Parameters dialog box,
the buffer-to-buffer
credit (BB_Credit)
value must be an
integer from 1 through
60 inclusive.
Low BB Credit
Threshold field in
Configure Open
Trunking dialog box
must have entries in
the range from 1 and
99. This message only
displays if the optional
OpenTrunking feature
is installed.
At the Configure Date
and Time dialog box,
the DD value (day)
must be an integer
from 1 through 31
inclusive.
At the Configure Fabric
Parameters dialog box,
the error detect
time-out value
(E_D_TOV) must be an
integer from 2 through
600 inclusive.
Description
Ensure that the feature key
being installed is specifically for
this director serial number.
Verify and enter a valid UDP
port number from 1 through
655535.
Verify and enter a valid number
between 1 through 60.
Enter a value from 1 to 99 into
the Low BB Credit Threshold of
the Configure Open Trunking
dialog box.
Verify and enter a valid date.
Verify and enter a valid number
which must be between 2
through 600.
Information and Error Messages
Action
221