HP Surestore 64 - Director Switch User Manual page 229

Table 9: Product Manager Messages (Continued)
The IPL configuration
cannot be deleted.
The link to the director
or switch is not
available.
The maximum number
of address
configurations has
been reached.
This feature is not
installed. Please
contact your sales
representative.
The optical transceiver
is not installed.
This feature has not
been installed. Please
contact your sales
representative.
This feature key does
not include all of the
features currently
installed and cannot
be activated while the
switch is online.
Director Product Manager User Guide
Message
Deletion of the IPL
address configuration
was attempted and
was not allowed.
The Ethernet
connection between
the HAFM server and
the director or switch is
down or unavailable.
The maximum number
of saved address
configurations has
been reached.
This feature is not
supported in this
software version.
The maximum number
of saved address
configurations has
been reached.
Indicator that the
feature has not been
installed on this switch.
The feature set
currently installed for
this system contains
features that are not
being installed with the
new feature key. To
activate the new
feature key, you must
set the switch offline.
Activating the new
feature set, however,
will remove current
features not in the new
feature set.
Description
Cancel the operation.
Establish and verify the network
connection.
Delete configurations no longer
needed to allow new
configuration to be saved.
Contact your sales
representative.
Delete configurations no longer
needed to allow new
configurations to be saved.
Contact your sales
representative to obtain the
desired feature.
Set the switch offline through
the Set Online State dialog box,
then activate the new feature
key using the Configure Feature
Key dialog box.
Information and Error Messages
Action
229