Fru; Clear System Error Light; Enable Unit Beaconing; Properties - HP Surestore 64 - Director Switch User Manual

Product Manager Overview

FRU

Clear System Error Light

Enable Unit Beaconing

Properties

Close

38
Click an SBAR card, CTP card, port card, power supply module, or cooling
fan module in the Hardware View only and choose FRU from the Product
menu to display a menu of specific options for that FRU. These are the same
menu option as when you right-click these components in the Hardware
View. For details on these options refer to the following sections in
Options" on page 96:
Port Card Menu
CTP Card Menu
SBAR Card Menu
Cooling Fan and Power Supply
Choose this to turn off the amber system error LED, located below the green
power LED on the director front bezel.
Click the check box to toggle unit beaconing on or off. When the check box
has a check mark, unit beaconing is on, and the amber system error light on
the director front bezel blinks to help users locate the actual unit in an
equipment room. When you click the check box to remove the check mark,
unit beaconing is disabled and the amber LED goes out. You can only enable
beaconing if there are no system errors (the system error light is off).
Click to display the Director Properties dialog box. This dialog box contains
the director name, description, location, and contact person configured
through the Configure Identification dialog box. Also included is other
product information as detailed in Director Properties. You can also display
this dialog box when you double-click an area on the illustration in the
Hardware View, away from a hardware component.
Choose this option to close the Product Manager window.
Director Product Manager User Guide
"Menu