Obtaining Hardware Information; Displaying Fru Information - HP Surestore 64 - Director Switch User Manual

Note:
enabled for the director. You can enable or disable unit beaconing when you
right-click the director graphic, away from a FRU, and choose Enable Unit
Beaconing from the menu.
Note:
supply is working, as shown on the left (position 1) in the illustration.

Obtaining Hardware Information

This section explains how to access the FRU Properties, Port Properties, and
Director Properties dialog boxes.

Displaying FRU Information

Double-click a CTP card, power supply, cooling fan module, or SBAR card in the
Hardware View to display a FRU Properties dialog box. This dialog box
displays the FRU name, slot position relative to identical FRUs installed in the
chassis, active or failed state, beaconing state (CTP card, fan module, SBAR
card), part number, and serial number. For the CTP's card dialog box, the Speed
Capability of the card displays as either 1 Gb/sec or 2 Gb/sec.
Director Product Manager User Guide
If the amber LED flashes, this indicates that unit beaconing has been
Power supply failure indicator—When a blinking red and yellow diamond
displays on a power supply with the amber Fault indicator illuminated, the
power supply has failed. The backup power supply has taken over to supply
DC voltage to the director.
A green indicator displays and no status symbols display if the power
Cooling fan module failure indicator—When a blinking red and yellow
diamond ( ) displays on a fan module with the amber LED indicator
illuminated, the module has failed or is rotating insufficiently.
SBAR card beaconing indicator—The yellow triangle status symbol ( )
displaying on the SBAR card with the amber LED illuminated indicates that
beaconing has been enabled.
SBAR failure indicator—The blinking red and yellow diamond ( )
displaying on the SBAR card with the amber LED illuminated indicates a card
failure.
Monitoring and Managing the Director
75