Configuring Ports In The Ficon Management Style; Configure Ports Dialog Box (Ficon Management Style) - HP Surestore 64 - Director Switch User Manual

12. If you are finished configuring the switch, back up the configuration data. For

Configuring Ports in the FICON Management Style

To configure ports in FICON management style, use the following steps:
Note:
management style. Use the Configure Addresses - "Active" dialog box.
1. Choose Ports from the Configure menu on the menu bar. The Configure
Figure 37: Configure Ports dialog box (FICON management style)
2. Enable or disable extended distance buffering for the port when you click the
3. Enable or disable LIN alerts for the port when you click the check box in the
Director Product Manager User Guide
more information, refer to
on page 157.
You cannot configure port names in the Configure Ports dialog box in FICON
Ports dialog box displays, as shown in
Ports are numbered from 0-63 on the Director 2/64, and 0-127 and 132-143 on
the Director 2/140. Note that for the Director 2/140, ports 128-131 are internal
ports and not available for external connections.
check box in the 10-100 km column. When a check mark displays, extended
distance buffering is enabled.
LIN Alerts column. When a check mark displays, LIN alerts are enabled.
"Backing Up and Restoring Configuration
Figure 37.
Configuring the Director
Data"
135