Configuring Snmp Trap Message Recipients - HP Surestore 64 - Director Switch User Manual

3. When finished managing the library, click Close to close the dialog box.

Configuring SNMP Trap Message Recipients

Use the procedures in this section to:
Note:
MIB variables to your SNMP workstation, refer to the
Reference Guide for Directors and Edge Switches
through SNMP management stations that are not configured with community
names.
Director Product Manager User Guide
Configure the SNMP agent that runs on the director and implements the
following MIBs:
— MIB-II
— Fibre Channel Fabric Element MIB
— Director private MIB
— Fibre Alliance MIB
For complete information on objects defined in MIBs and steps to download
Configure network addresses and community names for up to six SNMP trap
recipients. An SNMP trap recipient is a network management station that
receives messages through SNMP for specific events that occur on the
director.
Define SNMP community names that SNMP managers use for reading
variables.
Authorize write permissions for writable MIB variables.
Note: SNMP managers may request, but will not receive, traps and SNMP data
Configuring the Director
HP StorageWorks CLI
.
141