HP Surestore 64 - Director Switch User Manual page 212

Information and Error Messages
Table 9: Product Manager Messages (Continued)
Cannot set all ports to
2 Gb/sec due to speed
restriction on some
ports.
Cannot set all ports to
Negotiate due to port
speed restriction on
some ports.
Cannot set Fibre
Channel parameters.
Cannot set switch date
and time.
Cannot set switch state.
Cannot set write
authorization without
defining a community
name.
212
Message
Displays if you try to
set ports to operate at
2 Gb/sec data speed
through the Configure
Ports dialog box and
some ports do not
support speed
configuration.
Displays if you try to
set all ports to
Negotiate through the
Configure Ports dialog
box and some ports do
not support speed
configuration.
Fibre Channel
parameters for the
director cannot be set
at the
Manager
because the Ethernet
link is down or busy.
The switch date and
time cannot be set at
the
application because
the Ethernet link is
down or busy.
The director or switch
state cannot be set at
the
application because
the Ethernet link is
down or busy.
A community name
was not defined in the
Configure SNMP
dialog box for the
write authorization
selected.
Description
Product
application
Product Manager
Product Manager
Director Product Manager User Guide
Action
Replace ports that do not
support speed configuration
with those that do support more
than one configuration.
Replace ports that do not
support speed configuration
with those that do support more
than one speed configuration.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
Provide a name in the Name
field where write authorization
is checked.