Synchronizing Date And Time - HP Surestore 64 - Director Switch User Manual

3. Click the Time fields that require change, and type numbers in the following
4. Click Activate to set the director date and time, and close the Configure Date

Synchronizing Date and Time

Use these steps to set the director to periodically synchronize date and time with
HAFM.
1. At the Configure Date and Time dialog box, choose the Periodic
2. Click Activate to enable synchronization and close the Configure Date and
3. Click Sync Now to synchronize the director and HAFM immediately. The
4. Click OK.
5. Click Activate to enable synchronization and close the Configure Date and
6. If you are finished configuring the director, back up the configuration data.
Director Product Manager User Guide
ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
and Time dialog box.
Date/Time Synchronization check box. The Date and Time fields are
grayed-out and not selectable.
Time dialog box. The director date and time synchronize with the HAFM date
and time at the next update period (at least once daily).
Date and Time Synced dialog box displays.
Time dialog box.
For more information, refer to
Data" on page 157.
"Backing Up and Restoring Configuration
Configuring the Director
147