Configure Addresses - "Active" Dialog Box - HP Surestore 64 - Director Switch User Manual

Configuring the Director
To configure, save, and activate port addresses, use the following steps:
1. Choose Addresses from the Configure menu on the menu bar, then choose
Figure 39: Configure Addresses - "Active" dialog box
138
— Unblock all ports—Unblocks all port addresses that are currently
blocked. This allows communication from all port addresses in the
switch.
— Clear all—Clears the prohibit and blocked status of all port addresses in
the switch.
CUP Name—This user-defined name is assigned to the control unit port
(CUP). Up to 24 alphanumeric characters allowed, including spaces, hyphens
and underscores. A space is not allowed as the first character, and the
characters are case-sensitive. This is not a required field.
Activate—Click to activate the current configuration. A warning displays
before the action occurs.
Save As—Click to save the current configuration with a name and
description. The saved configuration will be stored on the HAFM Server and
in the Address Configuration Library. Refer to
Configurations" on page 139 for information on accessing this library.
Cancel—Click to cancel the configuration settings and close the dialog box
without saving. If you click this button after you click Save As, your changes
will be saved and the dialog box will simply close.
Active. The Configure Addresses - "Active" dialog box displays.
"Managing Stored Address
Director Product Manager User Guide