Threshold Alerts - HP Surestore 64 - Director Switch User Manual

Monitoring and Managing the Director

Threshold Alerts

A threshold alert notifies Product Manager users when the transmit (Tx) or
receive (Rx) throughput reaches specific values for director ports or port type
(E_Ports or F_Ports).
Choose the Threshold Alerts option on the Configure menu on the menu bar to
display the Configure Threshold Alerts dialog box. Use this dialog box to
configure criteria for generating a threshold alert. One criteria that you must
configure is a throughput value that equals a specific percentage of the port's total
throughput capacity. You also provide a time interval during which throughput is
measured and a time interval during which that throughput value must remain
constant. When throughput reaches the threshold value and remains constant for
the specified time, an alert is generated.
Threshold alerts occur as the following in the Product Manager:
For detailed procedures to configure threshold alerts, refer to
Threshold
116
An attention indicator (yellow triangle) that displays on the port in the
Port Card View.
An attention indicator (yellow triangle) that displays on the port card in the
Hardware View.
An attention indicator (yellow triangle) that displays in the Alert column of
the Port List View.
An attention indicator (yellow triangle) that displays by the Threshold Alerts
field in the Port Properties dialog box.
Detailed threshold alert data recorded in the Threshold Alert Log.
Alerts" on page 148.
"Configuring
Director Product Manager User Guide