Vtoc Area Dialog Box; Error Detail Dialog Box - HP XP7 User Manual

The table of Volume Retention displays following items.
Item
LDEV
Attribute
Emulation
Capacity
VTOC (CC:HH)

VTOC Area dialog box

When a host accesses a volume, the volume table of contents (VTOC) in the volume is updated to
include updated access logs. Use VTOC Area dialog box to specify the size of VTOC area.
Item
Start (CC:HH)
End (CC:HH)
OK
Cancel

Error Detail Dialog Box

If an error occurs with Volume Retention, the Error Detail dialog box appears. The Error Detail
dialog box displays error locations and error messages. For troubleshooting information related
to the Volume Retention, see
210 Volume Retention GUI reference
Description
Displays an LDEV ID. If an LDEV ID is displayed with a number sign (#), the
volume is an external volume.
The descriptions of icons follow:
Indicates a volume that has the Read/Write attribute.
Indicates a volume that has the Read Only attribute.
Indicates a volume that has the Protect attribute.
Displays an access attribute of the volume.
Displays the device emulation type of the volume.
Displays the capacity (in cylinders) of the volume.
Displays the range of the VTOC area (CC:HH – CC:HH) and the number of tracks
in the VTOC area. CC indicates a cylinder number. HH indicates a head number.
For example, 0:1-0:14(14Trk) indicates the following:
The range of the VTOC area is from cylinder 0 head 1 to cylinder 0 head
14.
The number of tracks in the VTOC area is 14.
Description
Displays starting location (CC:HH) of the VTOC. CC indicates a cylinder number.
HH indicates a head number.
You cannot change the starting location.
Specifies ending location of the VTOC. You van specify a cylinder number in
the textbooks on the left and a head number in the text box on the right.
Saves the requested VTOC change, and closes the VTOC Area dialog box. The
requested change is displayed on the Volume Retention window.
Note: When you click OK, the change to the VTOC size has not been applied
to the storage system. To apply the requested change to the storage system, you
must click Apply in the Volume Retention window.
Closes the VTOC Area dialog box without saving the requested VTOC change.
"Troubleshooting Volume Retention" (page 170).