Raidcom Monitor Pool; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

raidcom monitor pool

Sets the start or stop of performance monitoring of a pool for Smart Tiers.

Syntax

raidcom monitor pool -pool {<pool ID#> | <pool naming>} -operation <type>

Options and parameters

Option
-pool {<pool ID#> |
<pool naming>}
-operation <type>

Examples

Starting the performance monitoring of a pool for Smart Tiers of the Pool ID: 20.
raidcom monitor pool -pool 20 -operation start
Starting the performance monitoring of a pool for Smart Tiers of the Pool Name: my_tier_pool.
# raidcom monitor pool -pool my_tier_pool -operation start
Stopping the performance monitoring of a pool for Smart Tiers of the Pool ID: 20.
raidcom monitor pool -pool 20 -operation stop
Stopping the performance monitoring of a pool for Smart Tiers of the Pool Name: my_tier_pool.
# raidcom monitor pool -pool my_tier_pool -operation stop

raidcom reallocate pool

Sets the start or stop of tier reallocation of a pool for Smart Tiers.
Syntax
raidcom reallocate pool -pool {<pool ID#> | <pool naming>} -operation <type>
Options and parameters
Option
-pool {<pool ID#> |
<pool naming>}
-operation <type>
192 Configuration setting commands
Description
Specifies a pool ID (0- 1 27) or a pool name of a pool for Smart Tiers.
When specifying a number, it is recognized as a pool ID. Therefore, when you specify a pool
that the pool name is only a number, operate by specifying pool ID instead of specifying pool
name.
Instructs the operation of performance monitoring.
The operational types that can be specified:
start: Start the performance monitoring.
stop: Stop the performance monitoring.
Description
Specifies a pool ID (0- 1 27) or a pool name of a pool for Smart Tiers.
When specifying just a number, it is recognized as a pool ID. Therefore, when you specify
a pool that the pool name is only a number, operate by specifying pool ID instead of
specifying pool name.
Reallocation operation instruction
The operational types that can be specified:
start: Start the tier reallocation.
stop: Stop the tier reallocation.