Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

Options and parameters

Option
-pool {<pool ID#> |
<pool naming>}
-status <status>
-user_threshold <%>
-tier <Tier
number><threshold>
- subscription <%>
-pool_attribute
<pool_attribute>

Examples

Restoring the status of a pool ID: 6.
# raidcom modify pool -pool 6 -status nml
Restoring the status of a pool name: my_ss_pool.
# raidcom modify pool -pool my_ss_pool -status nml
Changing the user-defined thresholds of the pool ID:6 of the pool for Thin Provisioning/Smart
Tiers,WARNING, to 70% and High water mark to 80%.
# raidcom modify pool -pool 6 -user_threshold 70 80
Changing the user-defined threshold of the pool ID: 6 of the pool for Snapshot to 80%.
# raidcom modify pool -pool 6 user_threshold 80
Changing the pool for Thin Provisioning to the pool for Smart Tiers.
# raidcom modify pool -pool 6 -pool_attribute smart_manual
172 Configuration setting commands
Description
Specifies a pool ID (0- 1 27) or a pool name for Snapshot/Thin Provisioning/Smart Tiers.
When specifying just a number, it is recognized as a pool ID. Therefore, when you specify
a pool that the pool name is only a number, operate by specifying pool ID instead of
specifying pool name.
Specifies the status of a pool.
"nml" must be specified as the status.
Sets a user-defined threshold.
The valid range for Thin Provisioning/Smart Tiers is 5-95%.
The valid range for Snapshot is20-95%.
For Thin Provisioning/Smart Tiers, you may specify two user-defined thresholds, and their
valid ranges are 1- 1 00%, respectively. If you specify <threshold_1> and <threshold_2>:
The value of <threshold_1> is set as the threshold for WARNING specified to a pool.
The value of <threshold_2> is set as the threshold for High water mark specified to a
pool.
If you specify only <threshold_1>, your specified value and the system default value
(80%) are applied.
The valid range for Snapshot is 20-95%. You may specify only <threshold_1>. Even if
you specify the value for <threshold_2>, the value is ignored.
Specifies the pool information for Smart Tiers. Specify it to change the free capacity ratio
for new allocation per tier.
<Tier number>: Tier number (1-3)
<ratio>: Free space percentage for new allocation(0-50) [%]
Sets the maximum reserved V-VOL capacity rate (0-65535%) to the pool capacity.
0-65534: Specified percentage
65535: Unlimited
Specifies when changing the pool for Thin Provisioning to the pool for Smart Tiers, or the
pool for Smart Tiers to the pool for Thin Provisioning.
Specifies the following value depend on the type of pool desired to be changed.
smart_manual: Changes the pool for Thin Provisioning to the pool for Smart Tiers. It is
changed to manual reallocation.
thp: Changes the pool for Smart Tiers to the pool for Thin Provisioning.