Raidcom Delete Rcu_Path; Options And Parameters; Examples; Syntax - HP StorageWorks P9000 - Disk Arrays Reference Manual

Options and parameters

Option
-cu_free <serial#><id><pid>
-mcu_port <port>
-rcu_port <port>

Examples

To the RCU for which the product number; 64034, the RAID type: P9500 and the path ID: 1 are
set, adding RCU path: mcu port: CL1-A, rcu port CL1-B.
raidcom add rcu_path -cu_free 64034 R700 1 -mcu_port CL1-A -rcu_port CL1-B

raidcom delete rcu_path

Deletes logical paths from a specified RCU.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom delete rcu_path -cu_free <serial#> <id> <pid> -mcu_port
<port> -rcu_port <port>
Options and parameters
Option
-cu_free <serial#><id><pid>
-mcu_port <port>
-rcu_port <port>
Examples
From the RCU for which the product number; 64034, the RAID type: P9500 and the path ID: 1
are set, deleting RCU path: mcu port: CL1-A and rcu port CL1-B.
raidcom delete rcu_path -cufree 64034 R700 1 -mcu_port CL1-A -rcu_port CL1-B
182 Configuration setting commands
Description
-cu_free <serial#> <id> <pid>
This parameter is used to specify CU free that is specified by Serial#, id#, pid#.
< id > is used to set RAID Type, and it can be specified the following strings.
XP12000 Disk Array/XP10000 Disk Array:R500, XP24000/XP20000 Disk Array:R600,
P9500:R700
<pid> is used to set the path group ID (0-255).
Specifies a port number on the MCU.
Specifies a port number on the RCU (storage system port on the remote side).
Specify the port that the attribute is MCU Initiator port (MCU) or RCU Target port (RCU).
Description
-cu_free <serial#> <id> <pid>
This parameter is used to specify CU free that is specified by Serial#, id#, pid#.
< id > is used to set RAID Type, and it can be specified in the following strings.
XP12000 Disk Array/XP10000 Disk Array:R500, XP24000/XP20000 Disk Array:R600,
P9500:R700
< pid> is used to set the path group ID (1-255).
Specifies a Port number on the MCU.
Specifies a port number on the RCU (storage system port on the remote side).
Specify the port that the attribute is MCU Initiator port (MCU) or RCU Target port (RCU).